DL/T5418-2009火电厂烟气脱硫吸收塔施工及验收规程(英文版)电子书

书名页

版权页

Foreword

1　Scope

2　Normative References

3　Terms and Definitions

4　General

5　Acceptance of Materials and Finished Products

5.1　Acceptance of Metal Materials

5.2　Acceptance of Welding Materials

5.3　Acceptance of Non-metal Lining Materials

5.4　Acceptance of Finished Product Accessories

6　Prefabrication

6.1　General

6.2　Prefabrication of Bottom Plates

6.3　Prefabrication of Wall Plates

6.4　Prefabrication of Roof Plates

6.5　Member Prefabrication

6.6　Preassembly

7　Assembly

7.1　General

7.2　Acceptance of Foundation

7.3　Foundation Marking

7.4　Assembly of Base Plates

7.5　Assembly of Wall Plates

7.6　Installation of Stiffener

7.7　Assembly of Roof Plates

7.8　Assembly of Flue Gas Inlets ＆ Outlets

7.9　Assembly of Accessories Welded to the Absorber Body

8　Welding

8.1　Welding Procedure Qualification（WPQ）

8.2　Welder Examination

8.3　Welding Preparations

8.4　Welding Operations

8.5　Recommended Welding Sequence

8.6　Visual Inspection of Welds

8.7　Nondestructive Testing（NDT）and Leak Testing of Welds

8.8　Defect Repairing

9　Acceptance of Absorber Body

9.1　General

9.2　Geometric Shape and Dimensional Inspection of Absorber Body

9.3　Water Filling Test

10　Anticorrosion of Glass Resin Flake

10.1　General

10.2　Matrix Treatment

10.3　Lining Construction

10.4　Lining Inspection

10.5　Repairing

11　Anticorrosion of Rubber Lining

12　Installation of Absorber internals

12.1　General

12.2　Installation of Spraying Banks

12.3　Installation of Mist Eliminator

12.4　Installation of Agitator System

13　Painting and Insulation

14　Acceptance Records

Appendix A（Normative）Preparation and Inspection of T-joint Fillet Weld Specimens

Appendix B（Informative）Handover and Acceptance Table

Article Explanation

1　Scope

2　Normative References

4　General

5　Acceptance of Materials and Finished Products

5.1　Acceptance of Metal Materials

5.2　Acceptance of Welding Materials

5.3　Acceptance of Non-metal Iining Materials

5.4　Acceptance of Finished Product Accessories

6　Prefabrication

6.1　General

6.2　Prefabrication of Bottom Plates

6.3　Prefabrication of Wall Plates

6.4　Prefabrication of Roof Plates

6.5　Member Prefabrication

6.6　Preassembly

7　Assembly

7.1　General

7.2　Acceptance of Foundation

7.3　Foundation Marking

7.4　Assembly of Base Plates

7.5　Assembly of Wall Plates

7.7　Assembly of Roof Plates

7.8　Assembly of Flue Gas Inlets ＆ Outlets

7.9　Assembly of Accessories Welded to the Absorber Body

8　Welding

8.1　Welding Procedure Qualification（WPQ）

8.2　Welder Examination

8.3　Welding Preparation

8.4　Welding Operations

8.5　Recommended Welding Sequence

8.6　Visual Inspection of Welds

8.7　Nondestructive Testing（NDT）and Leak Test of Welds

8.8　Defect Repairing

9　Acceptance of Absorber Body

9.1　General

9.2　Geometric Shape and Dimensional Inspection of Absorber Body

9.3　Water Filling Test

10　Anticorrosion of Glass Resin Flake

10.1　General

10.2　Matrix treatment

10.3　Lining Construction

10.4　Lining Inspection

10.5　Repairing

11　Anticorrosion of Rubber Lining

12　Installation of Absorber Internals

12.1　General

12.2　Installation of Spraying Bank

12.3　Installation of Mist Eliminator

12.4　Installation of Agitator System

13　Painting and Insulation

14　Acceptance Records