万本电子书0元读

万本电子书0元读

顶部广告

GB50730-2011冶金机械液压、润滑和气动设备工程施工规范(英文版)电子书

售       价:¥

3人正在读 | 0人评论 9.8

作       者:中国冶金建设协会

出  版  社:中国计划出版社

出版时间:2016-01-01

字       数:8.6万

所属分类: 科技 > 工业技术 > 其他

温馨提示:数字商品不支持退换货,不提供源文件,不支持导出打印

为你推荐

  • 读书简介
  • 目录
  • 累计评论(0条)
  • 读书简介
  • 目录
  • 累计评论(0条)
《冶金机械液压、润滑和气动设备工程施工规范(GB50730-2011)》是根据原建设部《关于印发(2006年工程建设标准规范制订、修订计划(第二批))的通知》(建标函〔2006〕136号)的要求,由中国一冶集团有限公司会同有关单位共同编制完成的。住房和城乡建设部2011年7月29日发布的1113号公告批准为国家标准,自2012年8月1日起实施。本书是根据标准的中文版翻译而成。   本规范共9章,主要内容包括:总则,基本规定,设备和材料进场,设备安装,管道加工与安装,管道冲洗、吹扫和压力试验,调试和斌运转,管道涂漆,安全和环保。
目录展开

书名页

版权页

Announcement of Ministry of Housing and Urban-Rural Development of the People's Republic of China

Foreword

1 General Provisions

2 Basic Requirements

3 Mobilization of Equipment and Materials

3.1 Equipment Mobilization

3.2 Material Mobilization

4 Equipment Installation

4.1 General Requirements

4.2 Equipment Foundation

4.3 Base Line and Base Point for Equipment Installation

4.4 Anchor Bolt

4.5 Shim

4.6 Oil Tank

4.7 Cooler and Steam Heater

4.8 Filter

4.9 Accumulator

4.10 Pump and Pump Set

4.11 Complete Set of Hydraulic(Lubrication)Station

4.12 Valve Stand and Valve

4.13 Oil Purifier

4.14 Lubrication Grease Pump Station,Oil Filler and Oil Distributor

4.15 Water-separating Gas Filter,Atomized Lubricator(Oil Separator)and Control Valve

5 Pipe Processing and Installation

5.1 General Requirements

5.2 Pipe Processing

5.3 Pipe Welding

5.4 Pipe Pickling

5.5 Pipe Installation

6 Pipe Flushing,Purging and Pressure Test

6.1 Pipe Flushing

6.2 Pipe Purging

6.3 Pipe Pressure Test

7 Commissioning and Test Run

7.1 General Requirements

7.2 Commissioning and Test Run of Hydraulic System

7.3 Commissioning and Test Run of Lubrication Oil System

7.4 Commissioning and Test Run of Lubrication Grease System

7.5 Commissioning and Test Run of Oil Mist Lubrication System

7.6 Commissioning and Test Run of Process Lubrication System

7.7 Commissioning and Test Run of Pneumatic System

8 Pipe Painting

9 Safety and Environmental Protection

Explanation of Wording in This Code

Normative Standard

Explanation of Provisions

Statement on Preparation

1 General Provisions

2 Basic Requirements

3 Mobilization of Equipment and Materials

3.1 Equipment Mobilization

3.2 Material Mobilization

4 Equipment Installation

4.1 General Requirements

4.2 Equipment Foundation

4.3 Base Line and Base Point for Equipment Installation

4.4 Anchor Bolt

4.5 Shim

4.6 Oil Tank

4.9 Accumulator

4.11 Complete Set of Hydraulic(Lubrication)Station

5 Pipe Processing and Installation

5.2 Pipe Processing

5.3 Pipe Welding

5.4 Pipe Pickling

5.5 Pipe Installation

6 Pipe Flushing,Purging and Pressure Test

6.1 Pipe Flushing

6.2 Pipe Purging

6.3 Pipe Pressure Test

8 Pipe Painting

9 Safety and Environmental Protection

累计评论(0条) 0个书友正在讨论这本书 发表评论

发表评论

发表评论,分享你的想法吧!

买过这本书的人还买过

读了这本书的人还在读

回顶部